• (1) Door sensor with two "self contained" alerting melodies The Model DA4D "Door Chime" is a wireless motion sensor with a built-in RF transmitter, that sends a wireless signal (over 200 feet through floors and walls) to a remote receiver (sounder) or multiple sounders from multiple entries or doors. The receiver(s) provide a selection of two different, volume controlled, pleasant, alerting melodies to audibly detect where your attention is required. Another exclusive design feature, is the motion sensor "eye", that looks directly out of the side, providing coverage directly below the entry, instead of others that cover unnecessary, valuable floor space resulting in many aggravating, redundant signals. The door sensor "eye" has a detection range of up to 25 feet and due to our high quality optical fresnel lens, can be modified to cover any desired area of coverage from a single door entry to double doors or even a warehouse roll up freight delivery bay door.
  • Extra Sounder-Receiver for Alerting in Multiple Areas (1) Wireless receiver-sounder The Model DARD is an "extra" receiver-sounder that is simply added to the Model DA4D system, for alerting notification in additional areas, without having to purchase another complete system. The Model DARD is simply plugged into the second desired location, for example: in the office area and also in the warehouse, when activated will alert to audibly distinguish where your attention is required, with a pleasant, volume controlled melody.
  • Smaller size with better volume, easier to install being lighter weight can be held with double sticky tape, instead of sheet metal screws. Lighter weight reduces shipping cost. Smaller size reduces space in cooler. More reliable with heaver gauge wire for dependability. (1) Speaker with 20 feet of speaker wire and special phone jack The Model SPK is a simple plug-in speaker that includes the proper male plug to fit into the auxiliary speaker jack included in the DARD receiver (sounder). This optional accessory allows for greater volume for noisy areas and also allows for directional alerting. SPK is also very popular with convenience stores and liquor stores for alerting inside walk-in coolers and the store. The Model DARD (receiver-sounder) has a selectable switch included, that allows the alerting melody to be activated from both the receiver-sounder and the Model SPK at the same time.
  • (1) Door sensor-transmitter and (1) receiver-sounder Model DA4DAC is the basic Model DA4D system (complete set motion sensor with remote sounder), for doors or entrys that are open or closed, with the added feature of being able to use power supply for the motion sensor /transmitter), for those locations with high traffic, to eliminate battery replacement. The motion sensor / transmitter includes an AC transformer with 6' of cord that simply plugs into a 110v AC electrical outlet. If your location has an electrical outlet near the entrance or area of protection, then the DA4TAC is the ideal unit for never having to change a battery and always having the alerting notification you desire. Note: Notice in the picture the "extra" transformer to eliminate the battery in the door sensor-transmitter. The Model DA4DAC AC power door chime has all the exclusive designs of the best motion sensor alerting system available, the Model DA4D, with the advantage of no more battery changes.
  • (1) Door sensor-transmitter without any battery Model DA4TAC is an "extra" motion sensor, for doors or entrys that are open or closed, with the added feature of being able to use power supply for those locations with high traffic, to eliminate battery replacement. The motion sensor / transmitter includes an AC transformer with 6' of cord that simply plugs into a 110v AC electrical outlet. If your location has an electrical outlet near the entrance or area of protection, then the DA4TAC is the ideal unit for never having to change a battery and always having the alerting notification you desire. The Model DA4TAC has all the exclusive designs of the best motion sensor alerting system available, the Model DA4D and also, no more battery changes.
  • (1) Motion Sensor-transmitter for additional monitoring The Model DA4T is an "extra" motion sensor-transmitter that is simply added to the Model DA4D system and WARD system for monitoring additional doors, or areas of protection, without having to purchase another complete door chime system. The Model DA4T is simply attached to the second entry and can be programmed to alert with a different audible sound, if desired, to audibly distinguish where your attention is required.
  • (1) Door sensor with two "self contained" alerting melodies Model DA3D is a motion sensor (body heat in motion) alerting device with a built-in "pleasant" alerting melody with two different selectable alerting melodies. Another exclusive design feature, is the motion sensor "eye", that looks directly out of the side, providing coverage directly below the entry, instead of others that cover unnecessary, valuable floor space resulting in many aggravating, redundant signals. The motion sensor door chime does not require any reflectors or light beams projectors, therefore is immune to false alerts caused by transient light. The door sensor "eye" has a detection range of up to 25 feet and due to our high quality optical fresnel lens, can be modified to cover any desired area of coverage from a single door entry to double doors or even a warehouse roll up freight delivery bay door.
  • (1) Door sensor with two "self contained" alerting melodies Model DA1D is a sensor that is a self-contained, battery operated, magnet activated sensor, with a built-in "pleasant" alerting melody with two different selectable alerting melodies, for closed door applications. New dual alerting melody designed and offered exclusively by Mr. Chime: (1) Ding Dong (only one time) (2) Chirp Chirp One alerting sound for the front door and a different sound for the back door.
  • (1) Motion Sensor-transmitter for extra windows and doors. DA2T (extra sensor), is a wireless magnetic sensor/ transmitter that sends a signal to a remote receiver. Used for closed door, window or medicine cabinet to assist the professional caregiver or home care relative, that the elderly care patient requires attention. The DA2T sensor activates only when the door is opened and does not activate when the door is closed or left open. Ideal solution for doors, windows or medicine cabinets that are always closed.
  • (1) Door sensor with two "self contained" alerting melodies Designed for applications where the door is always kept closed, never left open. The alerting system is a wireless magnetic sensor with transmitter that transmits a wireless signal to a remote receiver over 200' away, that has a full range volume control to adjust the (2) different alerting melodies (A) our exclusive one time "ding dong" and (B) pleasant chirp chirp sound. The Model DA2D wireless magnetic door sensor offers another exclusive feature, a wireless "doorbell". With the addition of a simple to install "optional" standard O/C door bell button available at any local hardware store. Simply attaching this standard O/C door bell to our "NEW" direct plug in cable (included) and plugging this cable into the jack on the entry door sensor, the system is now a two function system (1) daytime customer entry door chime and (2) a wireless "door bell", all for the one low price. The DA2D door chime activates only when the door is opened and does not activated when the door is closed or left open.
  • (1) Wireless extra handheld assistance push button The Model DA5T (transmitter) is available separately to work in conjunction with any of the Mr. Chime, Inc. “Patented” family of innovative alerting products, therefore it can be added as a freight delivery alert with its own distinctively different alerting melody, from the customer entry alert.
  • (1) Magnetic sensor-transmitter and (1) wireless receiver-sounder The Model WA1 is a wireless wandering patient alert systems (transmitter) and (receiver) that sends a signal over 200' away, that "latches" a pleasant volume controlled alerting sound to awake or alert the professional caregiver or home care relative without startling the patient, and continues to alert until reset. The wandering alert system has several different sensors available to make any monitoring situation "simple", from monitoring a bed restricted person that requires assistance getting up from bed, or to monitoring doors and windows, (Model WA2). The Model WA1 also has a built-in assistance call function, with the use of our Model DA5T, (wireless push button) that provides a different audible alerting sound "momentary" for the patient that requires "non-emergency" assistance and is not wandering.
  • (1) Extra receiver-sounder with wireless reset. The Model WARD has all the same features found in the basic system with the addition of the wireless reset function. This function is ideal when more than one sounder, ie. upstairs and downstairs, is being used. Instead of going to each location to reset the sounder, simply press the wireless Model WARD push button and each sounder is reset "wirelessly". Requires the addition of our Model DA5T (hand held wireless transmitter button).
  • (1) Magnetic sensor-transmitter and (1) wireless receiver-sounder The Model WA2 is a battery operated elderly care wandering alert system that utilizes magnetically activated sensor to transmit a "wireless signal" to a remote receiver over 200' away. The volume controlled receiver emits a latching alert sound to assist the caregiver, that the elderly care patient requires attention.The WA2 door chime activates only when the door is opened which is the ideal solution for doors, windows or medicine cabinets that are closed and can be opened. Specially designed for versatility the door sensor mounts easily on all types of doors. The adhesive backed Velcro ® fastening system makes the WA2 installation in less than a minute with no damage to any structure. Due to the unique design available exclusively from Mr. Chime ® for increased reliability for all elderly care monitoring applications. Model WA2 also has a built-in assistance call function, with the use of our Model DA5T, that provides a different audible alerting sound "momentary" for the patient that requires "non-emergency" assistance and is not wandering.
  • (1) 12v dc Mini Strobe Light with Power Plug The Model DALR is an (optional) 12 vdc flashing red strobe light accessory that is simply plugs into the 12 volt output jack on the Model DARD receiver-sounder, using the special power cord and proper power plug (included). The Model DARD receiver-sounder has three (3) selectable timer output settings of 3, 30 or 60 seconds. After the duration of the selected timed output, the Model DARD resets or turns off the flashing alert. The strobe light is 3" in diameter and includes the female plug required for the output from the receiver. The Model DALR is manufactured onto an easy to install mounting box for a professional installation.
  • (1) Door sensor and (1) wireless receiver-sounder Model DA5D is a wireless push button and receiver, that performs many control and alerting functions, it simply transmits a wireless signal to a remote receiver over 200' away, that emits a choice of two different volume controlled, pleasant electronic door chime alerting sounds or a timed 12vdc output for many control applications, such as additional alerting melodies, electric gate and door openers or visual alerting devices. The “new” housing design allows protection from accidental activation by simply sliding the protective cover over the activator. When usage is required, simply slide the protective cover back and depress the indicated “PUSH” area. The Model DA5T (transmitter) is available separately to work in conjunction with any of the Mr. Chime, Inc. “Patented” family of innovative alerting products, therefore it can be added as a freight delivery alert with its own distinctively different alerting melody, from the customer entry alert.
  • (1) Speaker module with a power plug The Model PA1 is an (optional) plug-in alerting device that simply plugs into the 12 volt output feature on the DARD (sounder/receiver), with selectable timer output settings. The Model PA1 comes complete with the required female 12 volt plug for the 12 volt output. The Model PA1 is ideal for freight delivery notification when combined with the Model DA5T (wireless call button). The Model PA1 simply plugs into the 12v output jack on the Model DARD (sounder/receiver). When activated by the Model DA5T (call button) the PA1 continues to alert until reset or timed out by the selectable output timers. The Model PA1 is ideal for locations that require alerting for display cases or areas containing "high ticket" items, by simply setting the sensor, monitoring the special area with Data #2, and the receiver /sounder with the desired timer outout, when the area is violated, the Model PA1 will sound for the time desired or until reset. Model PA1 is also ideal for locations that desire a third alerting sound, when plugged into the 12v output jack and the Model DARD (receiver /sounder) Data set to #5 and the Model DA4T (sensor/transmitter) set with #2, the PA1 will alert of a customer entry with a short 3 second third alerting sound.
  • (1) Electromechanical 6 digit counter The Model DARC is an optional, 6 digit, electromechanical customer counter that simply plugs into the built-in 12 volt out put jack included on all of our Model DARD receivers. This optional accessory provides customer traffic flow tracking into stores or fitting rooms for planning employee hours and space utilization of fitting rooms. The electromechanical function of the keeps the counting results even if the receiver is unplugged from the power. The counting results of the retail people counter cannot be reset, therefore eliminating accidental data loss. The DARC can operate with the audible function of the Model DARD, or can operate independent without any audible (silent mode).
  • Magnetic Door Contact (Model RS1 reed switch N/O & Magnet) Model DA5TAC is a wired non-battery, DC powered door contact sensor and magnet set, used for doors or entries that are always closed, with the added feature, of sending a wireless signal “continuously” while the door is opened and stops when the door is secured. The wireless signal is sent to a Model DARD (receiver sounder), over 100 feet away. Mr Chime offers the “Model DA5T”, Battery operated unit, if power is not available at the entry way”.
  • (1) Door sensor and (1) wireless receiver-sounder Model DA5C is a wireless customer assistance button, that when activated, sends a signal, by the battery operated RF transmitter, over 200' away to the remote receiver that will emit a volume controlled, pleasant electronic alerting melody. The remote receiver / sounder simply plugs into any available standard electrical outlet that is centrally located to where the alerting melody can be heard by a sales representative, such as for example, near the cash register. The system is sold with as many push buttons as needed for each cubical within the fitting room and only one remote receiver / sounder is required for the audible alert. There are many outstanding features related to this unique Mr. Chime product and they are listed below, however the basic concept is to provide a simple to install, simple to operate, low maintenance, long life device that provides an outstanding service to your customer.
  • Hearing Impaired Alert System (1) Model DARD Receiver / sounder with built-in 12v dc Mini (Red Flashing) Strobe Light (2) The Model DARDLR is an (optional) 12 vdc flashing red strobe light that is built into our Model DARD Receiver Sounder, that adds an additional level of deterrence for security. (3) The Model DARDLR receiver-sounder has three (3) selectable timer output settings of 3, 30 or 60 seconds. After the duration of the selected timed output, the Model DARDLR resets and turns off the flashing alert. The strobe light is 3″ in diameter and has a flash rate of approximately 75 flashes per minute. • The Model DARDLR is ideal for noisy location alerting, such as pet grooming, machinery and etc • 12 vdc output with a selectable timer of 3, 30 or 60 seconds with automatic reset. • The Model DARDLR is ideal for the person that is hearing impaired.

Title

Go to Top